Monthly Archives: August 2017

ArcaOS Kernel 14.201 released

Arca Noae is pleased to announce the immediate availability of an updated kernel version 14.201 for ArcaOS.

This release contains the following changes:

  • Fixed a problem handling interrupts greater than 31.

This release is an update for ArcaOS users only.

Warning: Do not install this kernel if you are using ACPI.PSD version 3.23.05 or lower.  ACPI.PSD versions 3.23.05 and lower will not recognize this kernel and your system may not boot. If you have ACPI.PSD version 3.23.05 or lower installed, update the ACPI Driver Package to 3.23.06 first. Then you can install this kernel. The installer checks this for you.

If you have ArcaOS, this driver package is available for download from the Arca Noae website as part of the Support & Maintenance subscription for your ArcaOS product. Please log into your account and see your ArcaOS order details page to access your software.

If you are still running OS/2 and/or eComStation systems and haven’t yet moved up to ArcaOS, this might be a great reason to do so now. This update is not available for nor licensed for use with OS/2 or eComStation.

New MultiMac NIC driver package (20170811) released

MultiMacArca Noae is pleased to announce the immediate availability of a new release of our MultiMac NIC driver package.

This package contains updated drivers to incorporate enhancements and fixes in the system libraries, including reliability and stability improvements, and message interrupt support.

As always, please read the .txt file that comes with each driver and also provided on the wiki. If you have problems with any of the drivers in this release, please read the Debugging Guide in the wiki first. If your problem cannot be resolved with the Debugging Guide, then the problem should be reported to the ticketing system.

More information about the MultiMac NIC drivers may be found in the wiki.

If you have ArcaOS, this driver package is available for download from the Arca Noae website as part of the Support & Maintenance subscription for your ArcaOS product. Please log into your account and see your ArcaOS order details page to access your software.

If you have an Arca Noae OS/2 & eCS Drivers and Software Subscription, this driver package is available for download from the Arca Noae website as part of your Arca Noae OS/2 & eCS Drivers and Software Subscription. Please log into your account in order to access your software.

If you are still running OS/2 and/or eComStation systems and haven’t yet purchased a software subscription, this is a great reason to do so now. It may also be a good time to consider moving up to ArcaOS.

USB driver package version 11.16 released

USBArca Noae is pleased to announce the immediate availability of release 11.16 of our USB stack.

This is a maintenance release and includes minor fixes for stability and reliability.

If you have ArcaOS 5.0.1, then you already have this version and you do not need to download this update. If you have ArcaOS 5.0 installed, or are not using ArcaOS yet, then this version will bring you up-to-date.

More information about the USB drivers can be found in the wiki.

If you have problems with any of the drivers in this release, please read the Troubleshooting Guide in the wiki first. If your problem cannot be resolved with the Troubleshooting Guide, then the problem should be reported in the ticketing system.

If you have ArcaOS, this driver package is available for download from the Arca Noae website as part of the Support & Maintenance subscription for your ArcaOS product. Please log into your account and see your ArcaOS order details page to access your software.

If you have an Arca Noae OS/2 & eCS Drivers and Software Subscription, this driver package is available for download from the Arca Noae website as part of your Arca Noae OS/2 & eCS Drivers and Software Subscription. Please log into your account in order to access your software.

If you are still running OS/2 and/or eComStation systems and haven’t yet purchased a software subscription, this is a great reason to do so now. It may also be a good time to consider moving up to ArcaOS.

ACPI Driver Package version 3.23.06 released

An ACPI packageArca Noae is pleased to announce the immediate availability of our ACPI Driver Package for OS/2 and eComStation version 3.23.06.

This release contains the following changes:

  • Updated to ACPICA 20170629. See https://acpica.org/ for details.
  • Fixed a problem handling interrupts > 47
  • Implemented limited message interrupt support.
  • Prevent the use of interrupts > 31 on kernels which don’t support them.
  • Enhanced kernel detection due to problems with older kernels.

NOTE: This version will limit the number of interrupts to 32 for older kernels to avoid known problems which cause kernel traps. Most people will not be affected by this change. Please see the ACPI Requirements wiki for more details about this issue.

More information about the ACPI Driver Package may be found in the ACPI Driver wiki.

This release is an update for all users and is newer than the version in ArcaOS 5.0.1.

If you have ArcaOS, this driver package is available for download from the Arca Noae website as part of the Support & Maintenance subscription for your ArcaOS product. Please log into your account and see your ArcaOS order details page to access your software.

If you have an Arca Noae OS/2 & eCS Drivers and Software Subscription, this driver package is available for download from the Arca Noae website as part of your Arca Noae OS/2 & eCS Drivers and Software Subscription. Please log into your account in order to access your software.

If you are still running OS/2 and/or eComStation systems and haven’t yet purchased a software subscription, this is a great reason to do so now. It may also be a good time to consider moving up to ArcaOS.

AHCI Driver Package version 2.03 released

Arca Noae is pleased to announce the immediate availability of our AHCI Disk Driver Package version 2.03 for ArcaOS, OS/2, and eComStation.

This release contains the following major changes:

  • In version 2.03, Added support for message interrupts. This will allow certain motherboards with nonfunctional interrupt pin hardware to run. ACPI PSD version 3.23.06 is required for message interrupts to be enabled. Other minor fixes.
  • In version 2.02, Fixed interrupt handler issue for systems with multiple AHCI adapters.
  • In version 2.01, Major reorganization of the entire driver. Enhanced debugging support. Several minor fixes. Now a 32 bit driver.

This release is an update for all users. If you have ArcaOS, you need this update since ArcaOS 5.0 included v2.01 and ArcaOS 5.0.1 included v2.02. If you are still running eCS or OS/2, you need this update since the last released version for those platforms was v1.32 and a lot has changed since then.

More information about the AHCI Disk Package may be found in the AHCI wiki.

If you have ArcaOS, this driver package is available for download from the Arca Noae website as part of the Support & Maintenance subscription for your ArcaOS product. Please log into your account and see your ArcaOS order details page to access your software.

If you have an Arca Noae OS/2 & eCS Drivers and Software Subscription, this driver package is available for download from the Arca Noae website as part of your Arca Noae OS/2 & eCS Drivers and Software Subscription. Please log into your account in order to access your software.

If you are still running OS/2 and/or eComStation systems and haven’t yet purchased a software subscription, this is a great reason to do so now. It may also be a good time to consider moving up to ArcaOS.

ArcaOS

Have an enterprise Windows XP application and can’t upgrade Windows?

Talk to us about the possibility of wrapping that Windows XP (or 2000 or even NT 4) app and running it under Odin32. Similar to running an application in a container under Linux, the application itself is the only thing running in a Windows-compatibility environment, while the rest of the system is not subject to Windows security vulnerabilities on the LAN or on the internet. In this configuration, the only user training required is getting the system booted, authenticating to the network, and clicking the program object to start the same Windows application with which your users are already familiar.

Have a Windows application which requires LAN transport, but the version of Windows now in use is too outmoded for the latest file transport security? No problem. Applications running under Odin32 on ArcaOS which need to access network shares may do so using the integrated Samba 4 networking in ArcaOS, which appears to the application to be a local drive. All authentication, security, and transport encryption (if so configured) happens at the ArcaOS level, outside the Windows environment.

Maintain your critical applications on OS/2, DOS, or 16 or 32-bit Windows, on modern hardware or virtualized, while running on a secure, stable, maintained platform: ArcaOS 5.

Note: Any application accessing the public internet may be at risk. ArcaOS itself cannot defend a Windows application running under it against such exploits, if that application is vulnerable to attack.

ArcaOS 5.0 DVD

Last days of introductory pricing for ArcaOS 5.0 personal edition

The 90-day introductory period for ArcaOS 5.0 is drawing to a close, and with it, the sale price for ArcaOS 5.0 personal edition. There is still time – through August 15 – to get your license(s) for ArcaOS 5.0 personal edition at a $30 discount. That’s a savings of more than 23%.

ArcaOS 5.0 has been extremely well received by the press, developers, engineers, and users alike. More great features are in the works, and a license for 5.0 today ensures a great discount on 5.1, anticipated late 2018.